Shut down from TT2Go and power cycle modem

Shutting down stage

Shut down the TT2Go USB drive

  1. From the TT2Go desktop, click on the Start button.
  2. click on the Shut down command.

You have properly closed the applications and shut down the TT2Go USB drive.


Shut down the internet device(s)

  1. Switch off the modem followed by the router (if you have one) and also unplug the/their power cable(s).
    • Verify you have unplugged the correct cord by checking that all the lights on the modem are turned OFF.
    • If the modem has a battery remove it.
  2. Wait for 30 seconds.


Power on stage

Power on the computer and internet device(s)

For power cycling, it’s important that you switch on the devices only in the specified order.
  1. If the modem has a battery insert it back.
  2. Plug the power cord(s) back into the modem (and the router if you have one) but don’t switch it/them on yet.
  3. First, turn on your modem and wait for it to initialize (let the lights become stable).
  4. Then, switch on the router (if you have one) and let the blinking lights stabilize.
  5. Turn on your computer.


Eduardo has written 69 articles