TT2Go – Installing the USB Drive for Windows 10

A. Purpose

The aim of this document is to provide basic guidelines on how to download, install and configure the USB Drive with the WorkBooth Windows to Go Operating System (TT2Go).

B. Before you begin

  • Windows 7 and Windows 8.1 cannot be used, only Windows 10 64-bit.
  • To have the USB Drive (3.0 or 3.1).
  • USB ports on your computer and your internet speed may play an important role (the whole process may take from 20 minutes to more than 2 hours).
  • Have the main Operating System of your computer ready with the latest windows update. From your computer’s Operating System, go to the document: run Windows update on your main Operating System and perform these steps too.
  • Close all programs.
  • I M P O R T A N T !
    Make sure all USB drives or any other USB devices are removed (except keyboard and mouse).


C. Downloading the image

Please refer to our USB Table Guide below before connecting your USB stick to your computer:

  1. Insert the USB Drive in a USB port.
    • Unplug the headset.
    • Do not put the USB Drive into a USB Hub.
    • USB 3.0 would be ideal, preferable on the opposite side of the keyboard and mouse.
  2. Open Internet Explorer browser.
  3. Copy or Type this link to get the image (case sensitive):
  4. Click on the Save button and select Save as.
    It may take several minutes to download, depending on your computer and your internet speed.
  5. Save it on the Desktop. 171003-03ttg
  6. Wait until it is 100% downloaded, then just close the Internet Explorer or the browser you are using.
    We will work from the icon saved on the Desktop.
    NOTE Do not click on the Run button.


D. Installing the image

To begin with the installation of the image, insert the USB drive and do the following:
  1. Once the downloading is completed, close any windows you have open, and double-click to start the installer (TT2Go.exe executable file) from the Desktop.
  2. If you have a message from User Account Control (UAC), click on the Yes button to allow it.
  3. Extracting the file…
  4. When you have this screen, it may take more than 10 minutes, depending on your computer and your internet speed…
  5. Enter your Oracle ID and press the Enter key.
    NOTE: If you are a new hire and you don’t know your Oracle ID, please refer to the Welcome and/or Reminder email.

  6. Now the Warning message that appears reads: “This Next Step Will Erase All Data from the drive displayed!” (below will be the actual name of the USB drive).
    I M P O R T A N T !
    Make sure the USB drive is the only device plugged in. Failure to do this step could result in losing your important data.

    Type Y and press the Enter key or just press the Enterkey.
  7. You may have another Warning message like this.
    Type Y and press the Enter key or just press the Enterkey.
  8. This stage of the process may vary in time depending on your USB ports (3.0 is much faster than 2.0), the processor and your internet speed.
  9. When it reaches the 97%, it will take more time to finish, so you won’t see the percentage number increasing.
    I M P O R T A N T !
    Please don’t close nor interrupt the process.

Once completed the 100%, the window will close and no other message or window will appear


E. Warning

After all these steps are done, S T O P and wait for instructions.



Eduardo has written 72 articles